SAVANNAH VALLEY SPEEDWAY
March 28, 2024, 08:03:40 am
Welcome, Guest. Please login or register.

Login with username, password and session length
News: www.arcracing.com
 
  Home Help Search Gallery Staff List Login Register  

BTMRA RULES SANCTIONED BY ARMA

Pages: [1]   Go Down
  Print  
Author Topic: BTMRA RULES SANCTIONED BY ARMA  (Read 1639 times)
George Herrin
ARMA S/R Director
Administrator
Jr. Member
*****
Offline Offline

Gender: Male
Posts: 59



View Profile WWW
Badges: (View All)
Apple User Mobile User Level 4
« on: January 21, 2008, 12:50:21 pm »

08 Changes are in red so glance over the rules. everyone should be fine. Supersotck and J/P mowers besure your 8 to 1 is in the highest gear.

The Bama-TENN Mower Association (BTMRA) is an organization designed for lawn mower racers by lawn mower racers. This sport provides racers, their families and friends the opportunity to get involved with competitive racing that is affordable.
This rulebook provides the standards that regulate the operations within BTMRA. Maintaining safe, competitive racing is the primary purpose of this document and with the cooperation of all members, we can collectively keep this sport as it was intended, FUN.
A lot of time, money, and energy have been spent on mower fabrication, engine building, and traveling to and from race venues. Keep that in mind when racing and race clean and safe. Although mishaps will happen from time to time on the track, let’s look out for each other and keep ourselves and our mowers in the same conditions when we started the race as when we leave.

General Regulations

         1.   On Track Regulations
         a.   No alcoholic beverages or illegal drugs are allowed within the controlled area of the racing activity, including the pit area.
         b.   Any person who is actively participating in a race event (at any level) who has consumed alcoholic beverages, illegal drugs, or controlled substances that is mind and/or motor skills altering may not participate in any capacity.
         c.   Completing a safe pass is the responsibility of the overtaking driver. No bumping will be tolerated. This means if you initiate a pass and during execution you realize you cannot complete the pass in a safe manner then it is up to the overtaking driver to return to a safe position on the track while avoiding contact with other racers. You will gain more respect by taking yourself out then placing the other racers in an unsafe situation causing personal injury and mower damage.
         d.   If another racer is overtaking you and it is clear that they are faster make room for the overtaking racer and let them pass.
         e.   Blocking is part of racing but not to the point where it causes a crash.
         f.   The racer that causes an incident will restart the race at the end of the field. The track officials will determine this.
         g.   Flags will be used to communicate to the racers the following on track conditions:
        1)   Green: The race/practice is underway when displayed.
        2)   Yellow: CAUTION, DANGER. No passing on the entire track and the drivers will form a single line at a safe pace speed and close up to the leader and follow the starter’s directions.
        3)   Yellow & White: The field is not bunched up for restart. If this is displayed, close it up.
        4)   Red:  Stop all racing action immediately and shut off your engine. This flag is used in emergency situations where personal injury has occurred or the track is blocked.
        5)   Black:  This for driver or equipment infractions. The driver must safely exit the track and consult with the Chief Steward. A furled black flag is a warning to a driver to clean up his/her act or receive the full black flag indicating he/she needs to exit the track.
        6)   White: One lap to go. Crossed white and green indicates race is halfway complete.
        7)   Checkered: End of race or practice session. Winner may choose to make a victory lap with the checkered flag. The remaining drivers will complete the lap and safely exit the track to the pit area.
        h.   Driver must keep both hands on the steering wheel, except to momentarily operate other controls.  Driver’s body may not be intentionally positioned out of the mower seat onto or over the mower fender.
         i.   If you leave the course during the race re-enter the track as close as possible to the exiting point.  Exiting the course and reentering in order to gain position will result in the driver being placed at the rear of the field.
         j.   If the mower stalls move the mower to a safe place at least 10 feet off course.
         k.   Unsafe off track driving will not be tolerated.
         l.   Drivers must attend all drivers meetings.  If an unforeseen circumstance forces a driver to miss the meeting they shall begin at the rear of the field after meeting with the Chief Steward for a briefing on the day’s racing information.
        m.   Starting positions will be determined by random draw for a rolling start

2.  Pit Area and Track Regulations

        a.  No person under 7 years of age shall be on the grid. Those 7 years of age and older are permitted with an approved parents consent form on file.
        b.  Mower pit speed is 5 MPH Maximum.
        c.  Long pants, closed shoes and shirts are required in the track area.
        d.  Refueling: Driver must dismount and engine must be shut off when fuel is added.
A fire extinguisher (Liquid Fire Rated) must be in the hands of a crew member any time fuel is added to a hot machine.
        e.  Mower must be completely stopped before driver dismounts.
        f.  Track crews are under the direction of the Track Steward at all times.
        g.  The driver is responsible for the conduct of his/her guests and crew, even while on the track.
        h.  Only authorized personnel and drivers shall enter the racing course during racing activity. All individuals entering the pit area, including crew members and guests, must sign a release discharging BTMRA from liability. All individuals entering he track area must have a wrist band.
        i.  No pets are allowed on the racing course.
        j.  BTMRA reserves the right to limit pit space. Campers and RV’s may be permitted on race day only if space permits.
        k.  No vehicles other than racing mowers and official vehicles such as tow mowers shall be on or near the track.

3.  Driver Eligibility

        n.   Drivers must be members of the BTMRA by registering with the American Racing Mower Association.
        o.   Drivers must be at least 7 years of age. Drivers 7 thru 15 may participate only in classes provided for those age groups. See individual class rules. While there is no annual membership fee for drivers 7 thru 15 it is asked both parents be a member of BTMRA. While this is not required it is mandatory one parent be a registered member. Drivers under 18 years of age may compete with the approved parent’s consent form on file.
         p. Drivers participating in Junior Prepared must be at least 10 years old and no
     older than 15 years old.

         q.   All drivers must sign a release discharging the BTMRA/ARMA from liability.

4.  Safety Equipment

         q.   Every driver must wear an automobile racing or motorcycle-type full-face helmet approved by the U. S. Department of Transportation or the Snell Foundation.
         r.   The helmet must fit snugly and be securely buckled when driver is on the track.
         s.   Goggles or a face shield are required. Glasses are not adequate protection.
         t.   All drivers must wear long pants, long sleeved shirt, neck brace, full-fingered gloves and leather over the ankle footwear on the track. Chest protectors and other anti-abrasive suits are highly recommended. No loose clothing on the track.

5.  Mower Eligibility

        a.  Events are open to all riding type lawn mowers and garden tractors (with tires 20” or less) that were mass-produced and commercially available to mow residential lawns.  Zero turn riders are not permitted.  The mower may be modified from its original configuration as noted in section 7 General Mower Specifications

Modified Classes.

     b.  Final determination of eligibility and classification is up to the technical inspector.
     c.  Organizers reserve the right to reject at any time any mower, which in their opinion, represents an attempt to defeat the spirit of these rule, even though it complies with the letter of them.

6.  Technical Inspection

       a.  All mowers entered in any BTMRA event must inspected for compliance by the Technical Inspector prior to participating in practice or racing.
       b.  Drivers must complete the registration process and sign insurance releases prior to entering the tech line.
       c.  Drivers may be questioned on the content of this document and must pass in order to practice or race.
       d.  All required safety equipment must be present at technical inspection.
       u.   Any driver, guest, crew member or official that displays behavior that is considered dangerous to other drivers, guests, crew members or spectators may be removed from the events by authorized event officials.
       v.   Contact a staff member for clarification of any item mentioned above.

7.  General Mower Specifications- Modified Classes (All classes except Stock)

            a.  Cutting blades must be removed.
            b.  Cutting decks must be securely mounted in near stock location.  Only Pro-X mowers may simulate a cutting deck.   Decks may extend beyond the tire sidewalls a maximum of 2”.  Decks must be as wide as the body edge or running boards whichever is wider.
            c.  Mowers must maintain a minimum of 2.5 ” ground clearance under the lowest point of the deck.
           d.  Mowers must maintain a minimum of  4” of ground clearance under the lowest point of the frame.  Unused brackets and non-structural material may be removed to gain clearance.
           e.  Exhaust design is open, but must terminate away from the driver and competitors, in a rearward and downward direction without creating a safety hazard.
           f.  Starter must be onboard, either electric or pull rope.
           g.  Rear wheels must be secured to the rear axle with shaft locks, center bolts or thru-bolts.
           h. All non-stock mowers shall have an automatic, throttle closing device.
           i. Kill switch lanyard length shall be as short as necessary to effectively stop the mower as quickly as possible.  Lanyard length shall not exceed 40”. This device must be commercially available for racing and/or recreational vehicles such as ATVs, jet skis snowmobiles, etc.  Homemade and/or magnetic switches are not allowed.
          j.   Mower brakes on any Sportsman or X series mower must upgraded to a brake system on the rear axle.
          k. Brakes may be hydraulic or mechanical.
          l  Throttle and brake control may be relocated.                 
         m. The steering wheel, seat, body and frame must be centered between the right and left wheels.
         n. Drive line may be modified from the engine pulley to the rear wheels.  All classes except Pro-X must use a shiftable lawnmower transmission or transaxle. vari-drives may be used if originally equipped.
         o. No centrifugal or torque converter clutches permitted in any class except Pro-X.
         p. Rear axle may use open differential, locked, live or solid axle. No single wheel drive.  Aluminum rear axles are permitted.
         q. Wheels must be the same size on each axle, of any origin, but made of metal. Duel or tandem wheels are forbidden.
         r.  Front axle and steering may be modified or fabricated.  Front axles may be pinned, bolted or welded into place.  No suspension allowed.  All modifications and fabrications are subject to the judgment of  the technical inspector.
         s.  All steering linkage must be ball-type or spherical threaded rod ends.
         t.  Footholds and seat side boosters must be minimally designed so as not to entangle body parts.
         u.  External ignition systems and aluminum flywheels are authorized.

      IMPORTANT SAFETY NOTE

It is highly recommend that a scatter shield be installed on all engines that are operating with ANY alterations to the stock flywheel. This is to include removing the magnets. There have been incidents of altered stock flywheels exploding and causing serious personal injury. It is not recommended that any alterations be made to a stock flywheel. These are not tested under any standards for safety. Appropriate scatter shields are commercially available.
         
                  v.  All steering and wheel retention fasteners must terminate with locking nuts, castellated nuts with cotter pins, washers with new cotter pins, shaft locks, or locking bolts.  Cotter pins, E-rings and C-rings alone, bent nails, hitch pins, over center pins and quick-release pins are not permitted.
                  w.  Mowers may reach a maximum width of 38” sidewall to sidewall.
                  x.  Carburetors must be of lawnmower origin and from the same manufacturer as the engine block.
                  y.  Mowers may only operate on pump gasoline. No additives or additions to the fuel are allowed.  No nitrous oxide, rocket fuel, alcohol or other oxidizers are permitted.  Any attempt to circumvent this rule will result in disqualification from the event.
                  z.  All engines must be naturally aspirated.  Blowers, turbochargers, and water injection systems are not allowed.
                 aa.  Tires must be lawn tractor tires in all classes except Pro-X.
                 bb.  Substituted steering wheels are permitted.  They may not be mounted offset unless originally mounted offset. Steering “wheel” consists of a 360 degree circular device.  This wheel may not be pegged or have handles or other objects attached to them.
                 cc.  All positively charged terminals must be insulated with a cover or heavy tape. Battery must be well secured on the mower.
            dd.  All mowers must be safe and complete with all parts and panels in places with no missing fasteners.  Machines that have been involved in a on-track incident resulting in removal of body parts will only be allowed back on the track after the mower has been inspected to determine if its return would present a safety issue.
         ee.  All exposed sprockets, chains, and pulleys must be fitted with metal guards deflecting a broken chain downward.
           ff.  Mowers must be free of sharp edges, projections and protrusions.
                gg. A rear bumper is highly recommended and should be no wider than the rear tire width,  fabricated from ¾”outer diameter tubing with radius bends and installed a maximum of 2” from closest surface of the rear tire. Recommended height of 6”, no higher than 8”.  The bumper should be centered on the rear axle.  The intent of the bumper is to prevent mowers from “climbing” the rear tires and making contact with a driver.  No other bumpers are permitted, even those offered as factory options.
                hh.  Seats should be securely mounted to the mower, on the center of the frame.
                 ii.   Seats may be adjusted more towards the front or rear of the mower along the center line to help achieve better weight balance for handling.
                 jj.  The lowest portion of the seat pan should not be mounted lower than the top of the rear tires.
                 kk.  Sheet metal should be as delivered from the factory with the following exceptions:

                      Substitutions:
           ·   Where original factory sheet metal is not available or is damaged in a way that renders it unsafe or unusable sheet metal from another similar model mower that would otherwise be eligible to race may be used.
           ·   Replacement sheet metal must fit properly and be as close in shape to the factory panel as possible.
           ·   Substitute sheet metal should be attached to the frame in as close to the original position as possible.
           ·   All panels must be securely fastened so as not to create a safety hazard.
           ·   Substituted panels must be modified to fit properly and safely.
           ·   Minimal under hood mounting brackets are acceptable.
           ·   Panel substitution is provided in order to give the opportunity for a racer to run a mower that might otherwise be sidelined.  Panels may not be substituted simply to modify or customize a mower’s appearance.  Panel substitutions that make a mower look radically different than other mowers in a class will not be allowed.
Modification:
           ·   The hood and/or its components may be modified to provide clearance to allow tires to turn and steer without contact with sheet metal.
           ·   Sheet metal maybe bent or cut to allow for clearance of modifications otherwise allowed such as air cleaners, exhaust, brakes, clutches or other controls.
           ·   Openings cut in sheet metal shall not be more than 2 inches from the obstruction.
           ·   Fenders may be modified to allow for tire clearance issues due to chassis lowering as well as for handling purposes.  Allowable modifications include:
           .   Trimming fenders such that there remains ½” of clearance between the fender edge and the top of the tire.
           .   1” of vertical material remaining on the fender.  This will ensure the structural integrity of the fender.
           . Fender trimming should follow the contour line of the fender, not merely remove sheet metal in the immediate area.
                       
                   Removal

          ·   Any sheet metal originally on a mower may not simply be removed.  A mower originally delivered with fenders must have fenders.  A mower originally delivered with a hood must have a hood.
                 ll.  Race numbers should be a minimum of 3” high and of a sharply contrasting color
                      from its background, and be visible from all four sides of the mower. Mowers
                      without numbers or mower with same number will be assigned one during
                      registration. Duplicate numbered mowers will be assigned based on the order of
                      arrival.
               mm. All mowers must have a functioning mechanical clutch.  No chain drive from
                      engine to transmission is allowed.
               nn.  Mowers must present a neat and clean appearance.
               oo.  No written profanity is allowed on mowers.


8.  Mower Class Requirements and Designations

Mower Specifications
ALL MOTORS MUST BE OF LAWN MOWER ORIGIN

Stock Kids and Adults---Governed engine at 3650 RPM---Wheel Base is Factory Stock---front wheels Stock size---Rear wheels stock size

Super Stock and J/P Junior Prepared---Governed engine Single cylinder VIB or OHV 465 cc and under 3650 RPM 15 HP and under---Wheel Base Factory Stock---front tires13”tires 15psi max---Rear Tires 16” tires 15 psi Max

Mini-Sportsman---Valve in block 4 stroke 8.5 and under 19 c.i and under **---   Wheel Base 34” unaltered minimum---Front Wheels 4” minimum---Rear wheels 6” minimum

Sportsman---Valve in block single cylinder 4 stroke 8.5 and over---Wheel Base 39” unaltered minimum---Front wheels 5” minimum---Rear wheels 6”minimum 8” maximum

Mod X---   Single OHV and Twin Opposed VIB 20 and under or unlimited---Wheel Base 39” unaltered minimum---Front Wheels 5” minimum   ---Rear Wheels 6” minimum 8” maximum

Super Sportsman---All overhead valve and 2-cylinder 4 stroke 25hp and under---Wheel Base 42” unaltered minimum---Front wheels 6” minimum---Rear wheels 6” minimum 8” maximum

Pro-X---Single cylinder 4 stroke---engine Unlimited---Wheel Base 42” maximum on mid-engine chassis and 45” maximum on pan style chassis---Front wheels 4” minimum 8” maximum---rear wheels 4” minimum 8” maximum

* No overhead cams allowed
** Addresses the current usage of the same engine block covering several horsepower ranges.



STOCK MOWERS:
           ·   This class is for ages 7 and up. May be split into adult and kids classes depending on amount of entries.
           ·   These are “as manufactured” riding lawn mowers with governed engines that do not exceed 3,650 RPM.
           ·   Any replacement parts must be exact replacement for the originals.  They may not offer any performance improvements over the stock part.
           ·   Tech inspection will be for general operating condition, brakes, safety issues, RPM, and blade removal.  Tech inspectors may sanction modifications to ensure safety.

SUPER STOCK and J/P Junior Prepared:
          ·   This class is for kids age groups 10 thru 15 and 16 and up
          ·   Must be a full-size lawnmower with a 39” unaltered wheelbase, front engine origin, stamped steel frame, and have a steering column located behind the motor.
          ·   Mowers will use a governed engine with a 3650 RPM maximum (no load).
          ·   Motors may be any single-cylinder valve-in-block (flathead) or overhead valve (ohv) engines 15 horsepower and under with a 465 cc maximum in the original factory location.
          ·   At this time a national points race engine must follow these rules.The engine must be as delivered from the factory, internally and externally, with the following exceptions;  air cleaner, air filter or velocity stack, open exhaust and the removal of the debris screen covering the flywheel to allow quick and easy access to the flywheel nut while checking the 8 to 1 gear ratio.
For BTMRA local Racers only (Engine must maintain stock outward appearance, with the exception of the air filter, air cleaner or velocity stack. Engine may be internally modified) At this time a national points race engine must follow above rules.
          ·   Transmission or transaxle must be shift-able and of lawnmower origin.
          ·   The gear ratio in the highest gear must be 8 to 1.  For example, while in the highest gear, the rear wheels can turn no more than one revolution every time the engine rotates eight times. Lock outs are not permitted
          ·   Body must be stock, without external alterations.
          ·   Discreet frame strengthening is allowed.  The front axle may be reinforced, substituted or fabricated.  Racer-fabricated axles will be reviewed by the Tech Inspector to determine their apparent safety for racing.  Aluminum is not permitted as the material for the axle.
         ·   Front spindles are to be a minimum of 5/8” in diameter.
         ·   Metal rims are to be used both front and rear. Rim size will be 6” diameter in the front and 8” diameter in the rear.  Rear rims may be reinforced on the inside.
         ·   Front tires will be 13” diameter.  Rear tires will be 16” diameter.
         ·   Tire pressure may not exceed 15 psi.  This will be checked immediately
following the feature race.

         ·   Mowers must have steel factory decks.

MINI-SPORTSMAN:
         ·   Also ages 16 and up BTMRA club racing only 14 thru 15 may enter this class only if they have 1 full race season experience in super stock before entering.
         ·   Engines must maintain stock outward appearance with the exception of the air filter, air cleaner or velocity stack.
         ·   Crankshaft must be in original orientation and clearance hole in the frame.
         ·   Engine may be internally modified.
         ·   34” minimum wheelbase
         ·   4” minimum front wheels, 6” minimum rear wheels.

SPORTSMAN and MOD X:
          ·   Ages 16 and up only
          ·   Engine must maintain stock outward appearance, with the exception of the air filter, air cleaner or velocity stack.
          ·   Crankshaft must be in original orientation and clearance hole in the frame.
          ·   Engine may be internally modified.
          ·   39” minimum wheelbase
          ·   Mid-engine frames not allowed
          ·   5” minimum front wheels, 6” minimum rear wheels
          ·   Crankshaft must be in original orientation

SUPER SPORTSMAN:
         ·   Ages 16 and up only
         ·   Engine must maintain stock outward appearance, with the exception of the air filter, air cleaner or velocity stack.
         ·   Crankshaft must be in original orientation and clearance hole in the frame.
         ·   Engine may be internally modified.
         ·   42” minimum wheelbase
         ·   Mid-engine frames are not allowed
         ·   6” minimum front wheels, 6” minimum rear wheels

PRO-X:
         ·   Ages 16 and up only
         ·   Engine may be internally and externally modified.
         ·   Engine location may be modified.
         ·   Maximum wheelbase 42” on mid-engine chassis, 45” on pan style chassis.
         ·   Mid-engine frames and pan chassis may be altered to shorten wheelbase to a minimum of 37”.
         ·   Pan chassis frames must maintain the original pan chassis and body parts.
         ·   Mid-engine frames may be updated, but must retain the form and substance material of the original factory frame.
         ·   Mid-engine frames are limited to a maximum width of 15” and length of 48”.
         ·   Round tubing is not allowed, chrome molley and aluminum are not permitted.
         ·   Drive train  does not require a shiftable transmission.
         ·   Drive line is open.
         ·   Wheels 4” minimum 8” maximum front and rear.
         ·   Kart tires are allowed.  Snow Hogs limited to the front end only.
         ·   Stagger is allowed, offset is not.

BTMRA Point Structure

     Drivers participating in BTMRA sanctioned club points races will receive points for their finishing position.  These points will be recorded with the BTMRA office on a database that covers all BTMRA racers.  Points will accumulate through the calendar year. All drivers will retain 100% of the points they have accumulated throughout the racing season.  At the conclusion of racing season points series champions in each racing class will be announced at our Annual Banquet.
     
Point Values:
50 points for registration
50 points for starting the race
50 points for finishing the race
     ** In order to receive points for completing a race the mower must cross the finish line under mechanical power.  An exception to this rule occurs if a mower experiences mechanical problems on the white flag lap. Then the driver may push the mower across the finish line.

50 points for 5th place finishing position
100 points for 4th place finishing position
150 points for 3rd place finishing position
200 points for 2nd place finishing position
250 points for 1st place finishing position
Report Spam   Logged

George Herrin BP#6
BTMRA President
ARMA 8 Time National Champion
USLMRA 3 Time National Champion
Herrin Mower Sports Racing Team/Fat Boyz Racing
Hohenwald Tn. 38462
http://btmra.smfforfree2.com

Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly
proclaiming . . "WOW ---What a Ride

Share on Facebook Share on Twitter

Pages: [1]   Go Up
  Print  
 
Jump to:  

Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum

Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy
Page created in 0.035 seconds with 17 queries.